The Top Rated Cool, Badass Welding Helmets

I have on several occasions come across certain young people going about their welding job without a helmet and have wondered if they really know what risk they are subjecting themselves into. They risk losing their eyesight and without the eyesight they would actually not do the job. At one time I stepped far aside and watched them do the welding because I noticed that passersby would not dare watch directly when at close range. In fact when they reach near the welding field they would turn and look the opposite side to avoid the sparks from getting into their eyes and also to avoid the very bright light from harming their eyesight.

If passersby would dare take that precaution why wouldn’t these young welders care about the risk involved? Is the question that kept lingering in my mind. The safety regulations of any country dictate that every welder should wear a quality welding helmet while doing their job of welding. Welding without a helmet means that more than risking your eyesight you may go headlock with the authority and that may mean a heavy fine being imposed on you or worse still spending some months or years in prison.

Which is the best welding helmet?

Welding helmet come in many varieties. There are some which are cheap, other which are not very expensive and other expensive ones. Some have a very dark window through which you cannot see and you keep on lowering it to see the part you want to cut and put it on when done and others have a window you can see through and so you don’t have to keep lowering the. Some are heavy and others are not. The criteria of choosing the good welding helmet differ from one person to the other.

If for instance, you don’t often do the welding and you occasionally do it at home when need arises, then you need a cheap welding helmet and I don’t think you mind a heavyweight because you will put it one for just a short while then when you are done you remove it. If welding is what you do for a living, then I think you need a lightweight one because it can be cumbersome to put on a heavy welding helmet all day long, you will feel very tired at the end of the day. You need a high quality one made of durable material. You need a welding helmet with a transparent window.

Let us now look at some of the models available in the market, their pros and cons. Don’t forget to visit for the best welding helmets for beginners and experts.

Miller digital elite

This is a high quality welding helmet and is best for those people who do welding as a source of income. It is expensive compared to other models.


Its window area is big and that means one can be able to view a large part of the work. You don’t have to strain making movement as you try to view the place you want to cut.

It has adjustment settings. This is important because different types of welding and grinding require different amount of light.

When you want to check the work without the helmet, you don’t have to remove it because it has a provision where the standby position locks up.

It is lightweight and very comfortable to wear throughout the day.

After you have bought it you may not think of buying its spares for a long time because it comes with batteries, a holder for magnifying lens, many cover lenses and a bag.

The manufacturer gives a warranty of three years from the day you buy it.


It’s quite expensive

Lincoln Viking


Has a 4C lens technology which gives it more clarity than most of the other models, this means that you just see as clearly as you would with sunglasses. This enables to do welders to do their welding better.

It is adjustable. This means you can adjust the delay time and the kind of light required. You can also just when the heat is too much.

It is made in such a way that it covers not only the eyes like some other model but the entire head giving it a reassuring feeling.


It is quite expensive and therefore not many people can afford it.

Jaskson Insight


The price is very friendly to both the beginners or students and the professional

The quality is equally good and meets all the standard requirement of a good welding helmet.

It uses 4 sensors for light adjustment, this means where there is need it produces a shade of tint.

The control pad is easy to use because it has readable buttons.

The window has a wider field as compared to the other models of the same price.

It is more comfortable as compared to other models of the same price.

It is lightweight.


It is made of plastic and therefore can break if not handled carefully.

Miller classic


Both the sensitivity and the delay time can be adjusted.

It has a wide viewing window enabling you see a wide range of your work

Miller classic has an automatic-shutoff which assists in saving the power in the batteries.

It is an auto darkening unit that is very light. This means you can work in different positions.

It is considerably cheap.

It comes with a few lenses and a manual book to help the students.


Compared to its quality and features the price is not very friendly.

It is hard to make adjustments because the knobs are on the inside.



It is very cheap as compared to other auto-darkening ones

It has a wide viewing window.

It switches very fast from light to dark as compared to some other models.

It is very adaptive. That means it pick up changes in light very fast.

The sensitivity of the light can be adjusted depending on the kind of work you are doing.

It comes with a one year warranty.


It only work well from the inside because the daylight overwhelm the sensor.

It is made of poor quality material and therefore it does not last for long as compared to some other models.

Sometimes the auto-darkening fails to come out.

Not good for TIG applications.



It is very cheap and therefore pocket friendly for the students.

It is simple and has no adjustments to make.

It is good in working in squeezed spaces because it is very slim.

Unlike other models most people like working with this model because even if it breaks the cost of replacing it is low.

It can be modified easily because there are many available accessories in the market.


Its quality is very low.

You Need These Tips for Your Welding Job Interview

The following advice is designed to help anyone who is considering applying for a job as a welder. The advice is given by those experienced in both working as welders and in conducting interviews for welding positions.

  1. How to Dress for a Welding Job Interview


Welding job applicants should turn up to the interview dressed in welding gear and have gloves, jacket, helmet and tools with them. It is wise to not wear new gear to avoid appearing to be a novice and not the experienced welder the interviewer is expecting to meet. Applicants should be tidily dressed in clean jeans, long sleeved shirt and work boots, and conduct themselves in a polite, respectful manner at all times. Interviewers are looking for welders who are fully aware of safety requirements and are intelligent and able to listen and follow instructions, as well as be a team player.

An applicant who makes the mistake of failing to turn up with his or her helmet, gloves and tools is likely to face a rejection when asked to demonstrate their welding ability. The interviewer is expecting to interview someone who is ready to start immediately if hired.

  1. What to Take to a Welding Job Interview

Job applicants should turn up to an interview ready with helmet, gloves, welding jacket and work boots, as well as any tools they have that are typically required to undertake the job being applied for. A resume can be helpful though not always necessary as typically the interview for an entry-level welding job consists of insuring the applicant doesn’t have a criminal record, is drug-free and has legal resident status. Once those things have been addressed to the satisfaction of the interviewer the next likely step is to have the applicant demonstrate his or her ability to undertake the welding tasks the job requires.

While it is an advantage for an applicant to have a resume and several credible references with them the interviewer is likely to be more interested in whether you can successfully do the job being applied for.

  1. Practice before the Welding Job Interview
Factory welder doing his hard job
Factory welder doing his hard job

Applicants should prepare for a job interview firstly by finding out what the job entails and what styles of welding they will be required to undertake, whether it be MIG or stick welding. If the job entails stick welding and applicants do not have the necessary skills and experience it is important that they not waste their time or the interviewers by giving the impression that they do possess the necessary skills. As MIG and stick welding are two distinctively different forms of welding it is important that when applying for a job that involves stick welding applicants have the ability to successfully demonstrate their ability to undertake the task given them.

  1. Present Well at the Welding Job Interview

While an ability to weld well is vitally important applicants should be prepared to answer some questions about themselves as well as the work they have undertaken prior to applying for this job. Being able to present themselves in a confident but polite manner requires an ability to make eye contact and speak clearly. When asked applicants should be ready to tell the interviewer about the strengths they possess and what makes them a good fit for that company. Applicants will often be given the opportunity to ‘sell themselves’ and it is vital that they have rehearsed their answers prior to the interview so they can respond confidently. How an applicant pitches themselves to the interviewer may mean the difference between being employed and looking for another job.

Good welders are in demand but that doesn’t mean that applicants should assume that just by turning up for the interview they are automatically hired. Employers are looking for team players who have good skills and experience. When applying for a welding job it is important that applicants practice the welding skills the job requires, turn up with their safety clothing and gear, and take some time beforehand to prepare so they increase their chances of being hired.

How to Stay Warm Outside

With the weather cooling down to single digits and below to sub zero, wrapping up warm is essential. Resembling a yeti when traipsing into the office isn’t going to win you fashion points, nor is it going to have you taken seriously. So what to do when it gets really cold? Read on for a few ideas on how to stay warm outside:

  1. Stay warm, stay dry. This may sound obvious – who in their right mind is going to go outside on a freezing cold day and get deliberately wet? But it is easier done than you might think. Yomping energetically is going to have you sweating buckets in no time, especially if you are dressed up to the nines. To avoid getting hot and sweaty and then cold and wet, layer your clothing appropriately. Start with a synthetic base layer that wicks the moisture away from your skin, then don a layer that provides insulation. Pick something lightweight and easy to wear underneath your normal office garb. You want to stay toasty without being uncomfortable. Remember not to choose a cotton layer as your base layer: it doesn’t dry quickly and it can start to smell when it gets sweaty.                     coffee-stay-warm
  1. Keep your core warm. When people suffer with frostbite it is the body’s way of dealing with the excessive cold. Your fingers and toes are nothing compared to your internal organs. The body’s regular temperature is 98.6 degrees Fahrenheit and hypothermia will occur when it goes below 95. Don’t try and keep your whole body warm, just work on keeping your core warm.
  1. . Just because a University of Michigan professor claims to debunk the myth that 70% of a person’s bWear a hatody heat escapes through the top of their head, doesn’t mean you want to forgo that warm hat altogether. Anything you can put on that will keep you warm and covered up is a must.                                                                                                                         dfrow-blog-how-to-wear-a-hat-for-your-face-shape-oblong
  1. Pick mittens over gloves. As above, remember to keep your core warm, but anything you can do to keep the rest of you warm is going to aid the core. Pick mittens as they allow your fingers to cluster together and use each other for warmth. Gloves separate the fingers and make each one work harder to keep it warm.
  1. Drink. It might sound counter-intuitive to drink cold water when you are already cold, but your body needs water to help it retain body heat. The more liquid you have in your body the easier it is to stay warm!